GHL175
 
 
 
You are here in Askoptions : Home
Categories:
GHL175
Code : 1454
see larger image
  Post Enquiry
Description
Product Description
STANDARD ACESSORIES
Four Position Tool Post, Toolpost Spanners, Center Adopter, 2 Nos. MT-3 Dead Centers, Electric Motor with Electrical Controls, Thread Dial Indicator, Camlock operating Handle, Chip Tray.
EXTRA ACCESSORIES
Collet attachment
collet ( 1 mm to 25 mm ) each collet cost
collet ( 4 mm to 40 mm ) each collet cost
Taper Turning Attachment
Rear Tool Post
Mechanical Brake
Machine Lamp
Chuck Flange 8"
Chuck Flange 10"
Face plate ( 350 mm Dia )
Follow Rest
Steady Rest
Quick change Tool Post
Coolant Pump & Fitting
Carrier Plate
Extra Center Height 2"
Digital Read out System (DRO) Note
(1) All The above specifications are approximate and subject to change without prior notice as improvements are made from time to time.
(2) The Description " standard accessories / features " confirms to its list not the photo of models shown in the catalogue.
 
SPECIFICATIONS
PIONEER GHL-175
Description
Height of Centre(mm) 175
Swing Over Bed (mm) 340
Swing Over Cross Slide (mm) 176
Distance Between Center (mm) 750/1000
Max. Swing in Gap (mm) 620
BED  
Bed Type 2 V & 2 Flat
Bed Width (mm) 280
Length of Gap in Front of Face Plate (mm) 160
HEAD STOCK  
Number of Spindle Speeds 8 (std.) 16(optnl.)
Spindel Speed Range : R.P.M. 54 TO 1200 (std.) 35 TO 1200 (optnl.)
Type & Size of Spindle Nose Cam Lock, size D1-4
Spindle Bore ( mm) 40 mm
Spindle Taper Number MT - 5
Diameter of Front Bearing OD 110 x ID 60
FEEDS AND THREADS  
Number of Feeds 72
Range of longitudinal Feeds (mm/Rev) 0.033 to 0.468
Range of Cross Feeds (mm/rev) 0.021 to 0.301
Number of Threads 103
Range of Metric Threads/No. 0.2 to 6.5 mm (31)
Range of Inch Threads,No. 72 to 4 TPI (36)
Range of Module Threads/No. 0.4 to 3 Module (15)
Range of D.P. Threads/No.

44 to 8 D.P. (21)
Leed Screw Dia (mm) 31.75
Leed Screw Pitch (mm) 6 mm
SADDLE  
Cross Slide Dimension (mm) 178 x 415
Cross Slide Travel (mm) 225
Tool Shank Section (mm) 22 x 22
Saddle Traverse (mm) 640/890
Compound Slide Traverse (mm) 130
TAIL STOCK  
Spindle Dia (mm) 50.8
Spindle Taper Number MT-3
Spindle Travel 175
Lateral Move to Tail Stock (mm) 5
MOTOR  
Main MKotor (Kw.) 1.5
 
MODEL
FLOOR SPACE
(APPROX)
WEIGHT kgs.
(APPROX)
CASE DIMENSION
   
NET
GROSS
L
x
W
x
H
GHL -1
2300 X 1000 MM
800
1000
2500
1100
1600
GHL -2
2600 X 1000 MM
1000
1200
2800
1100
1600
Home About Us Register To Win Offer Disclaimer Advertise With Us Terms & Conditions Privacy Policy Contact Us
GHL175