Product Description
STANDARD ACESSORIES
Four Position Tool Post, Toolpost Spanners, Center Adopter, 2 Nos. MT-3 Dead Centers, Electrical controls, Thread Dial Indicator, Mechanical Brack with Starting Third Shaft, chuck flange, Coolant Pump with Fitting,
EXTRA ACCESSORIES
Collet attachment & collets
Taper Turning Attachment
Rear Splash Guard (except GHL - 300) Chip Tray.
Rear Tool Post
Machine Lamp
Face plate
Follow Rest
Steady Rest
Quick change Tool Post
Carrier Plate
True Chuck
Dog Chuck
Note
(1) All The above specifications are approximate and subject to change without prior notice as improvements are made from time to time.
(2) The Description " standard accessories / features " confirms to its list not the photo of models shown in the catalogue.
|
SPECIFICATIONS
|
GHL 300
|
| Description |
|
| Height of Centre(mm) |
300 |
| Swing Over Bed (mm) |
590 |
| Swing Over Cross Slide (mm) |
570 |
| Distance Between Center (mm) |
1000/1500/2000/2500/3000/3500 |
| Max. Swing in Gap (mm) |
800 |
| BED |
|
| Bed Type |
2 V & 2 Flat |
| Bed Width (mm) |
355 |
| Length of Gap in Front of Face Plate (mm) |
150 |
| HEAD STOCK |
|
| Number of Spindle Speeds |
12 |
| Spindle Speed Range : R.P.M. |
27 to 700 |
| Type & Size of Spindle Nose |
A/2 - 8 |
| Spindle Bore ( mm) |
80 |
| Spindle Taper Number |
MT - 6 |
| Diameter of Front Bearing |
OD 200 x ID 110 |
| FEEDS AND THREADS |
|
| Number of Feeds |
72 |
| Range of longitudinal Feeds (mm/Rev) |
0.057 to 0.460 |
| Range of Cross Feeds (mm/rev) |
0.003 to 0.128 |
| Number of Threads |
105 |
| Range of Metric Threads/No. |
0.2 to 7 mm (33) |
| Range of Inch Threads,No. |
72 to 7 TPI (33) |
| Range of Module Threads/No. |
0.4 to 3 Module (15) |
| Range of D.P. Threads/No. |
44 to 8 D.P. (21)
|
| Leed Screw Dia (mm) |
38.1 |
| Leed Screw Pitch (mm) |
6 |
| SADDLE |
|
| Cross Slide Dimension (mm) |
255 x 455 |
| Cross Slide Travel (mm) |
350 |
| Tool Shank Section (mm) |
25 x 25 |
| Saddle Traverse (mm) |
900/1400/1900/2400/2900/3400 |
| Compound Slide Traverse (mm) |
150 |
| TAIL STOCK |
|
| Spindle Dia (mm) |
63.5 |
| Spindle Taper Number |
MT - 4 |
| Spindle Travel |
200 |
| Lateral Move to Tail Stock (mm) |
5 |
| MOTOR |
|
| Main MKotor (Kw.) |
5.5 |
|
MODEL
|
FLOOR SPACE
(APPROX)
|
WEIGHT kgs.
(APPROX)
|
CASE DIMENSION
|
| |
|
NET
|
GROSS
|
L
|
x
|
W
|
x
|
H
|
|
GHL -3
|
2600 X 1000 MM
|
1200
|
1900
|
2800
|
|
1100
|
|
1600
|
|
GHL -4
|
3100 X 1000 MM
|
1300
|
1500
|
3300
|
1100
|
1600
|
